Skip to topic | Skip to bottom
Home
Home
Home.TransitDirectionsQualysr1.2 - 18 Apr 2007 - 00:26 - BillWardtopic end

Start of topic | Skip to actions

Transit Directions to PenLUG meetings

Bayshore Technology Park
1300 Island Drive
Redwood City, CA 94065

NOTE: See the meeting details page for the meeting in question to determine the specific room for the meeting. The meeting is hosted by Qualys, whose offices are located in the Bayshore Technology Park. The meeting room is not, however, in the Qualys office itself.

Interactive map at Google Maps | Driving Directions

If you encounter difficulty finding us, call Bill Ward at 650 279-9904 (cell).

By Train

BART riders, transfer to Caltrain at Millbrae. Or, take a SamTrans bus to the Belmont train station: routes 390, 391, 397, KX, and PX all connect between various BART stations and Belmont.

Take Caltrain (Weekday Schedule, PDF) to the Belmont station. See below for directions on how to get to the meeting from the station.

  • Northbound trains (from San Jose) arrive at 5:38 (#271) and 6:30 (#281).
  • Southbound trains (from San Francisco) arrive at 5:14 (#266) and 6:14 (#276).
Note that express and baby bullet trains skip the Belmont station, so if you are on one of those trains, get off at Redwood City (northbound) or either San Mateo or Hillsdale (southbound) and take the next local train.

After the meeting:

  • Southbound trains (toward San Jose) depart at 9:05 (#192) and 10:40 (#194).
  • Northbound trains (toward San Francisco) depart 8:56 (#191), 9:56 (#193), and 11:16 (#195).

It is very important that you get on the right train. Since trains could be running late, don't just use the schedule to determine which train to board. The last two digits of the train number are displayed on the rear-view mirror of the locomotive (southbound trains) or the front cab car (northbound trains). If in doubt, ask the conductor when the train stops. If you get on an express train that skips your station, you could be significantly delayed!!

Getting from Belmont Caltrain Station to the Meeting

There are several options:

  • Walk or bicycle to the meeting from the Caltrain station using the driving directions
  • Send mail to members@penlug.org before the meeting to ask for a ride.
  • Ride the bus: route 260 (see below).

It's about 1.7 miles' walk according to Google directions, so allow plenty of time and only attempt it if your physical fitness and the weather allow.

By Bus

Belmont is in San Mateo County and bus service is provided by SamTrans (System Map, PDF).

The closest public transit route to Qualys is Route 260 (Map, PDF) which stops on Marine Parkway near the Qualys office. The last run is just after 6pm, and the bus meanders all over Redwood Shores, so go early. Although there is no return bus service home after the meeting, you can almost certainly expect a member to offer a ride. Send mail to members@penlug.org and ask if someone can take you home or to a train station or bus stop after the meeting.

Other buses that serve the Belmont Caltrain station (running up and down El Camino Real) are the 262, 390, 391, 397, KX, and PX routes. See above for instructions on getting from the train station to the meeting.

-- BillWard - 27 Apr 2006
to top


You are here: Home > TransitDirectionsQualys

to top

Copyright © 1999-2008 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback