============ start debug info ============ libhd version 13.11u (x86-64) using /var/lib/hardware kernel version is 2.6 ----- /proc/cmdline ----- root=UUID=93b13ad4-96fa-4a3c-806b-83b98f2e5436 ro quiet splash ----- /proc/cmdline end ----- debug = 0xff7ffff7 probe = 0x0000138fc4aa17fff9fffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp +braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod +braille.baum -manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial +wlan -bios.crc -hal -bios.vram -bios.acpi -bios.ddc.ports=1 -bios.ddc.ports=2 -bios.ddc.ports=3 -bios.ddc.ports=4 -modules.pata -max -lxrc) shm: attached segment 1572885 at 0x2b6982104000 >> hal.1: read hal data hal: connected to: :1.20 ----- hal device list ----- 0: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_usbraw' linux.device_file = '/dev/bus/usb/004/004' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/004/004' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' linux.sysfs_path = '/sys/class/usb_device/usbdev4.4' 1: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if2' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if2' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Application Specific Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 1 (0x1) usb.interface.class = 254 (0xfe) usb.interface.number = 2 (0x2) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.2' usb.num_configurations = 1 (0x1) usb.device_class = 224 (0xe0) usb.device_subclass = 1 (0x1) usb.device_protocol = 1 (0x1) usb.vendor_id = 1452 (0x5ac) usb.product_id = 33286 (0x8206) usb.vendor = 'Unknown (0x05ac)' usb.product = 'USB Application Specific Interface' usb.device_revision_bcd = 6501 (0x1965) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = false usb.bus_number = 4 (0x4) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.2' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.2' 2: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if1' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if1' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Wireless Interface' usb.interface.protocol = 1 (0x1) usb.interface.subclass = 1 (0x1) usb.interface.class = 224 (0xe0) usb.interface.number = 1 (0x1) info.linux.driver = 'hci_usb' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1' usb.num_configurations = 1 (0x1) usb.device_class = 224 (0xe0) usb.device_subclass = 1 (0x1) usb.device_protocol = 1 (0x1) usb.vendor_id = 1452 (0x5ac) usb.product_id = 33286 (0x8206) usb.vendor = 'Unknown (0x05ac)' usb.product = 'USB Wireless Interface' usb.device_revision_bcd = 6501 (0x1965) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = false usb.bus_number = 4 (0x4) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1' 3: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0_bluetooth_hci' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0_bluetooth_hci' linux.subsystem = 'bluetooth' linux.hotplug_type = 2 (0x2) info.product = 'Bluetooth Host Controller Interface' bluetooth_hci.physical_device = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0' info.capabilities = { 'bluetooth_hci' } info.category = 'bluetooth_hci' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0' linux.sysfs_path = '/sys/class/bluetooth/hci0' 4: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Wireless Interface' usb.interface.protocol = 1 (0x1) usb.interface.subclass = 1 (0x1) usb.interface.class = 224 (0xe0) usb.interface.number = 0 (0x0) info.linux.driver = 'hci_usb' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0' usb.num_configurations = 1 (0x1) usb.device_class = 224 (0xe0) usb.device_subclass = 1 (0x1) usb.device_protocol = 1 (0x1) usb.vendor_id = 1452 (0x5ac) usb.product_id = 33286 (0x8206) usb.vendor = 'Unknown (0x05ac)' usb.product = 'USB Wireless Interface' usb.device_revision_bcd = 6501 (0x1965) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = false usb.bus_number = 4 (0x4) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0' 5: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8206_noserial' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 4 (0x4) usb_device.can_wake_up = false usb_device.is_self_powered = false usb_device.version_bcd = 512 (0x200) usb_device.speed_bcd = 4608 (0x1200) usb_device.linux.device_number = 4 (0x4) usb_device.num_ports = 0 (0x0) usb_device.device_revision_bcd = 6501 (0x1965) info.product = 'Unknown (0x8206)' usb_device.product = 'Unknown (0x8206)' info.vendor = 'Unknown (0x05ac)' usb_device.vendor = 'Unknown (0x05ac)' usb_device.product_id = 33286 (0x8206) usb_device.vendor_id = 1452 (0x5ac) usb_device.device_protocol = 1 (0x1) usb_device.device_subclass = 1 (0x1) usb_device.device_class = 224 (0xe0) usb_device.num_configurations = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1' 6: udi = '/org/freedesktop/Hal/devices/platform_bluetooth' info.udi = '/org/freedesktop/Hal/devices/platform_bluetooth' linux.subsystem = 'platform' linux.hotplug_type = 1 (0x1) info.product = 'Platform Device (bluetooth)' platform.id = 'bluetooth' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'platform' linux.sysfs_path_device = '/sys/devices/platform/bluetooth' linux.sysfs_path = '/sys/devices/platform/bluetooth' 7: udi = '/org/freedesktop/Hal/devices/acpi_SLPB' info.udi = '/org/freedesktop/Hal/devices/acpi_SLPB' linux.hotplug_type = 4 (0x4) button.has_state = false info.capabilities = { 'button' } info.category = 'button' info.product = 'Sleep Button' button.type = 'sleep' info.parent = '/org/freedesktop/Hal/devices/computer' linux.acpi_type = 11 (0xb) linux.acpi_path = '/proc/acpi/button/sleep/SLPB' 8: udi = '/org/freedesktop/Hal/devices/acpi_PWRF' info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF' linux.hotplug_type = 4 (0x4) button.has_state = false info.capabilities = { 'button' } info.category = 'button' info.product = 'Power Button' button.type = 'power' info.parent = '/org/freedesktop/Hal/devices/computer' linux.acpi_type = 11 (0xb) linux.acpi_path = '/proc/acpi/button/power/PWRF' 9: udi = '/org/freedesktop/Hal/devices/acpi_PWRB' info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB' linux.hotplug_type = 4 (0x4) button.has_state = false info.capabilities = { 'button' } info.category = 'button' info.product = 'Power Button' button.type = 'power' info.parent = '/org/freedesktop/Hal/devices/computer' linux.acpi_type = 11 (0xb) linux.acpi_path = '/proc/acpi/button/power/PWRB' 10: udi = '/org/freedesktop/Hal/devices/acpi_CPU0' info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' linux.hotplug_type = 4 (0x4) processor.can_throttle = true processor.number = 0 (0x0) info.capabilities = { 'processor' } info.category = 'processor' info.product = 'Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz' info.parent = '/org/freedesktop/Hal/devices/computer' linux.acpi_type = 1 (0x1) linux.acpi_path = '/proc/acpi/processor/CPU0' 11: udi = '/org/freedesktop/Hal/devices/acpi_CPU1' info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' linux.hotplug_type = 4 (0x4) processor.can_throttle = true processor.number = 1 (0x1) info.capabilities = { 'processor' } info.category = 'processor' info.product = 'Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz' info.parent = '/org/freedesktop/Hal/devices/computer' linux.acpi_type = 1 (0x1) linux.acpi_path = '/proc/acpi/processor/CPU1' 12: udi = '/org/freedesktop/Hal/devices/storage_model_DVD_R___UJ_85J' org.freedesktop.Hal.Device.Storage.method_execpaths = { 'hal-storage-eject', 'hal-storage-closetray' } org.freedesktop.Hal.Device.Storage.method_argnames = { 'extra_options', 'extra_options' } org.freedesktop.Hal.Device.Storage.method_signatures = { 'as', 'as' } org.freedesktop.Hal.Device.Storage.method_names = { 'Eject', 'CloseTray' } info.interfaces = { 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage' } info.addons = { 'hald-addon-storage' } block.storage_device = '/org/freedesktop/Hal/devices/storage_model_DVD_R___UJ_85J' info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_R___UJ_85J' linux.fstab.options = 'user,noauto' linux.fstab.mountpoint = '/media/cdrom0' storage.cdrom.write_speeds = { '4234', '2822', '1411' } storage.cdrom.write_speed = 4234 (0x108a) storage.cdrom.read_speed = 4234 (0x108a) storage.cdrom.support_media_changed = true storage.cdrom.hddvdrw = false storage.cdrom.hddvdr = false storage.cdrom.hddvd = false storage.cdrom.bdre = false storage.cdrom.bdr = false storage.cdrom.bd = false storage.cdrom.dvdplusrdl = true storage.cdrom.dvdplusrwdl = false storage.cdrom.dvdplusrw = true storage.cdrom.dvdplusr = true storage.cdrom.dvdram = false storage.cdrom.dvdrw = true storage.cdrom.dvdr = true storage.cdrom.dvd = true storage.cdrom.cdrw = true storage.cdrom.cdr = true storage.requires_eject = true storage.hotpluggable = false info.capabilities = { 'storage', 'block', 'storage.cdrom' } info.category = 'storage' info.product = 'DVD-R UJ-85J' info.vendor = 'MATSHITA' storage.size = 0ull (0x0ull) storage.removable = true storage.removable.media_available = false storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0' storage.lun = 0 (0x0) storage.firmware_version = 'FCQA' storage.vendor = 'MATSHITA' storage.model = 'DVD-R UJ-85J' storage.drive_type = 'cdrom' storage.automount_enabled_hint = true storage.media_check_enabled = true storage.no_partitions_hint = true storage.bus = 'scsi' block.is_volume = false block.minor = 0 (0x0) block.major = 11 (0xb) block.device = '/dev/scd0' linux.hotplug_type = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0' linux.sysfs_path_device = '/sys/block/sr0' linux.sysfs_path = '/sys/block/sr0' 13: udi = '/org/freedesktop/Hal/devices/volume_uuid_93b13ad4_96fa_4a3c_806b_83b98f2e5436' volume.unmount.valid_options = { 'lazy' } volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'data=' } org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } volume.ignore = true info.udi = '/org/freedesktop/Hal/devices/volume_uuid_93b13ad4_96fa_4a3c_806b_83b98f2e5436' linux.fstab.options = 'defaults,errors=remount-ro' linux.fstab.mountpoint = '/' volume.partition.flags = { } volume.partition.uuid = '6ADEBBB1-1AFB-4970-A3CE-9AED41722AD8' volume.partition.label = 'Untitled 2' volume.partition.type = 'EBD0A0A2-B9E5-4433-87C0-68B6B72699C7' volume.partition.scheme = 'gpt' info.product = 'Volume (ext3)' volume.partition.media_size = 250059350016ull (0x3a38b2e000ull) volume.partition.start = 237640896512ull (0x3754805000ull) volume.size = 12418433024ull (0x2e4324000ull) volume.num_blocks = 24254752 (0x1721920) volume.block_size = 512 (0x200) volume.partition.number = 3 (0x3) info.capabilities = { 'volume', 'block' } info.category = 'volume' volume.is_partition = true volume.is_disc = false volume.linux.is_device_mapper = false volume.is_mounted_read_only = false volume.is_mounted = true volume.mount_point = '/' volume.label = '' volume.uuid = '93b13ad4-96fa-4a3c-806b-83b98f2e5436' volume.fsversion = '1.0' volume.fsusage = 'filesystem' volume.fstype = 'ext3' storage.model = '' block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' block.is_volume = true block.minor = 3 (0x3) block.major = 8 (0x8) block.device = '/dev/sda3' linux.hotplug_type = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' linux.sysfs_path_device = '/sys/block/sda/sda3' linux.sysfs_path = '/sys/block/sda/sda3' 14: udi = '/org/freedesktop/Hal/devices/volume_uuid_965544EF9DB936F6' volume.unmount.valid_options = { 'lazy' } volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'force' } org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } volume.ignore = false info.udi = '/org/freedesktop/Hal/devices/volume_uuid_965544EF9DB936F6' volume.partition.flags = { } volume.partition.uuid = '8164833A-E7DD-4F82-9A0E-9123174F5AC7' volume.partition.label = 'Customer' volume.partition.type = '48465300-0000-11AA-AA11-00306543ECAC' volume.partition.scheme = 'gpt' info.product = 'Macintosh HD' volume.partition.media_size = 250059350016ull (0x3a38b2e000ull) volume.partition.start = 209735680ull (0xc805000ull) volume.size = 237296943104ull (0x3740000000ull) volume.num_blocks = 463470592 (0x1ba00000) volume.block_size = 512 (0x200) volume.partition.number = 2 (0x2) info.capabilities = { 'volume', 'block' } info.category = 'volume' volume.is_partition = true volume.is_disc = false volume.linux.is_device_mapper = false volume.is_mounted_read_only = false volume.is_mounted = false volume.mount_point = '' volume.label = 'Macintosh HD' volume.uuid = '965544EF9DB936F6' volume.fsversion = '' volume.fsusage = 'filesystem' volume.fstype = 'hfsplus' storage.model = '' block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' block.is_volume = true block.minor = 2 (0x2) block.major = 8 (0x8) block.device = '/dev/sda2' linux.hotplug_type = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' linux.sysfs_path_device = '/sys/block/sda/sda2' linux.sysfs_path = '/sys/block/sda/sda2' 15: udi = '/org/freedesktop/Hal/devices/volume_uuid_2860_11F4' volume.unmount.valid_options = { 'lazy' } volume.mount.valid_options = { 'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=' } org.freedesktop.Hal.Device.Volume.method_execpaths = { 'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject' } org.freedesktop.Hal.Device.Volume.method_argnames = { 'mount_point fstype extra_options', 'extra_options', 'extra_options' } org.freedesktop.Hal.Device.Volume.method_signatures = { 'ssas', 'as', 'as' } org.freedesktop.Hal.Device.Volume.method_names = { 'Mount', 'Unmount', 'Eject' } info.interfaces = { 'org.freedesktop.Hal.Device.Volume' } volume.ignore = false info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2860_11F4' linux.fstab.options = 'partition' linux.fstab.mountpoint = '/media/EFI' volume.partition.flags = { } volume.partition.uuid = '000070C2-56CF-0000-2C38-0000636A0000' volume.partition.label = 'EFI system partition' volume.partition.type = 'C12A7328-F81F-11D2-BA4B-00A0C93EC93B' volume.partition.scheme = 'gpt' info.product = 'EFI' volume.partition.media_size = 250059350016ull (0x3a38b2e000ull) volume.partition.start = 20480ull (0x5000ull) volume.size = 209715200ull (0xc800000ull) volume.num_blocks = 409600 (0x64000) volume.block_size = 512 (0x200) volume.partition.number = 1 (0x1) info.capabilities = { 'volume', 'block' } info.category = 'volume' volume.is_partition = true volume.is_disc = false volume.linux.is_device_mapper = false volume.is_mounted_read_only = false volume.is_mounted = false volume.mount_point = '' volume.label = 'EFI' volume.uuid = '2860-11F4' volume.fsversion = 'FAT32' volume.fsusage = 'filesystem' volume.fstype = 'vfat' storage.model = '' block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' block.is_volume = true block.minor = 1 (0x1) block.major = 8 (0x8) block.device = '/dev/sda1' linux.hotplug_type = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' linux.sysfs_path_device = '/sys/block/sda/sda1' linux.sysfs_path = '/sys/block/sda/sda1' 16: udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' info.udi = '/org/freedesktop/Hal/devices/storage_serial_1ATA_WDC_WD2500JS_40TGB0_WD_WCANY2515919' storage.partitioning_scheme = 'gpt' storage.removable.media_size = 250059350016ull (0x3a38b2e000ull) storage.requires_eject = false storage.hotpluggable = false info.capabilities = { 'storage', 'block' } info.category = 'storage' info.product = 'WDC WD2500JS-40T' info.vendor = 'ATA' storage.size = 250059350016ull (0x3a38b2e000ull) storage.removable = false storage.removable.media_available = true storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0' storage.lun = 0 (0x0) storage.firmware_version = '20.0' storage.serial = '1ATA_WDC_WD2500JS-40TGB0_WD-WCANY2515919' storage.vendor = 'ATA' storage.model = 'WDC WD2500JS-40T' storage.drive_type = 'disk' storage.automount_enabled_hint = true storage.media_check_enabled = false storage.no_partitions_hint = false storage.bus = 'scsi' block.is_volume = false block.minor = 0 (0x0) block.major = 8 (0x8) block.device = '/dev/sda' linux.hotplug_type = 3 (0x3) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0' linux.sysfs_path_device = '/sys/block/sda' linux.sysfs_path = '/sys/block/sda' 17: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial_usbraw' linux.device_file = '/dev/bus/usb/005/004' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/005/004' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial' linux.sysfs_path = '/sys/class/usb_device/usbdev5.4' 18: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_usbraw' linux.device_file = '/dev/bus/usb/005/001' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/005/001' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' linux.sysfs_path = '/sys/class/usb_device/usbdev5.1' 19: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_usbraw' linux.device_file = '/dev/bus/usb/004/003' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/004/003' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial' linux.sysfs_path = '/sys/class/usb_device/usbdev4.3' 20: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw' linux.device_file = '/dev/bus/usb/004/001' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/004/001' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' linux.sysfs_path = '/sys/class/usb_device/usbdev4.1' 21: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw' linux.device_file = '/dev/bus/usb/003/001' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/003/001' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' linux.sysfs_path = '/sys/class/usb_device/usbdev3.1' 22: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_usbraw' linux.device_file = '/dev/bus/usb/002/002' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/002/002' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' linux.sysfs_path = '/sys/class/usb_device/usbdev2.2' 23: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw' linux.device_file = '/dev/bus/usb/002/001' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/002/001' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' 24: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_usbraw' linux.device_file = '/dev/bus/usb/001/004' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/001/004' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial' linux.sysfs_path = '/sys/class/usb_device/usbdev1.4' 25: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw' linux.device_file = '/dev/bus/usb/001/001' linux.subsystem = 'usb_device' linux.hotplug_type = 2 (0x2) usbraw.device = '/dev/bus/usb/001/001' info.product = 'USB Raw Device Access' info.capabilities = { 'usbraw' } info.category = 'usbraw' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' 26: udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' linux.device_file = '/dev/snd/timer' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) alsa.device_file = '/dev/snd/timer' info.product = 'ALSA Timer Device' alsa.type = 'timer' info.capabilities = { 'alsa' } info.category = 'alsa' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/sound/timer' 27: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' linux.device_file = '/dev/sequencer2' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) oss.device_file = '/dev/sequencer2' info.product = 'OSS Sequencer Device' oss.type = 'sequencer' info.capabilities = { 'oss' } info.category = 'oss' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/sound/sequencer2' 28: udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' linux.device_file = '/dev/sequencer' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) oss.device_file = '/dev/sequencer' info.product = 'OSS Sequencer Device' oss.type = 'sequencer' info.capabilities = { 'oss' } info.category = 'oss' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/sound/sequencer' 29: udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' linux.device_file = '/dev/snd/seq' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) alsa.device_file = '/dev/snd/seq' info.product = 'ALSA Sequencer Device' alsa.type = 'sequencer' info.capabilities = { 'alsa' } info.category = 'alsa' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/sound/seq' 30: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_2' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_2' linux.device_file = '/dev/snd/pcmC0D2c' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog ALSA Capture Device' alsa.type = 'capture' alsa.device_id = 'ALC882 Analog' alsa.pcm_class = 'generic' alsa.card_id = 'Intel' alsa.device = 2 (0x2) alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/pcmC0D2c' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/pcmC0D2c' 31: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_1' linux.device_file = '/dev/snd/pcmC0D1p' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Digital ALSA Playback Device' alsa.type = 'playback' alsa.device_id = 'ALC882 Digital' alsa.pcm_class = 'generic' alsa.card_id = 'Intel' alsa.device = 1 (0x1) alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/pcmC0D1p' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/pcmC0D1p' 32: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_1' linux.device_file = '/dev/snd/pcmC0D1c' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Digital ALSA Capture Device' alsa.type = 'capture' alsa.device_id = 'ALC882 Digital' alsa.pcm_class = 'generic' alsa.card_id = 'Intel' alsa.device = 1 (0x1) alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/pcmC0D1c' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/pcmC0D1c' 33: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0' linux.device_file = '/dev/snd/pcmC0D0p' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog ALSA Playback Device' alsa.type = 'playback' alsa.device_id = 'ALC882 Analog' alsa.pcm_class = 'generic' alsa.card_id = 'Intel' alsa.device = 0 (0x0) alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/pcmC0D0p' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/pcmC0D0p' 34: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0' linux.device_file = '/dev/snd/pcmC0D0c' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog ALSA Capture Device' alsa.type = 'capture' alsa.device_id = 'ALC882 Analog' alsa.pcm_class = 'generic' alsa.card_id = 'Intel' alsa.device = 0 (0x0) alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/pcmC0D0c' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/pcmC0D0c' 35: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1' linux.device_file = '/dev/mixer' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog OSS Control Device' oss.type = 'mixer' oss.device_id = 'ALC882 Analog' oss.card_id = 'Intel' oss.card = 0 (0x0) oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' oss.device_file = '/dev/mixer' info.capabilities = { 'oss' } info.category = 'oss' linux.sysfs_path = '/sys/class/sound/mixer' 36: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0' linux.device_file = '/dev/dsp' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog OSS PCM Device' oss.type = 'pcm' oss.device = 0 (0x0) oss.device_id = 'ALC882 Analog' oss.card_id = 'Intel' oss.card = 0 (0x0) oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' oss.device_file = '/dev/dsp' info.capabilities = { 'oss' } info.category = 'oss' linux.sysfs_path = '/sys/class/sound/dsp' 37: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1' linux.device_file = '/dev/snd/controlC0' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'Intel ALSA Control Device' alsa.card_id = 'Intel' alsa.type = 'control' alsa.card = 0 (0x0) alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' alsa.device_file = '/dev/snd/controlC0' info.capabilities = { 'alsa' } info.category = 'alsa' linux.sysfs_path = '/sys/class/sound/controlC0' 38: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0' linux.device_file = '/dev/audio' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog OSS PCM Device' oss.type = 'pcm' oss.device = 0 (0x0) oss.device_id = 'ALC882 Analog' oss.card_id = 'Intel' oss.card = 0 (0x0) oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' oss.device_file = '/dev/audio' info.capabilities = { 'oss' } info.category = 'oss' linux.sysfs_path = '/sys/class/sound/audio' 39: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_1' linux.device_file = '/dev/adsp' linux.subsystem = 'sound' linux.hotplug_type = 2 (0x2) info.product = 'ALC882 Analog OSS PCM Device' oss.type = 'pcm' oss.device = 1 (0x1) oss.device_id = 'ALC882 Analog' oss.card_id = 'Intel' oss.card = 0 (0x0) oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' oss.device_file = '/dev/adsp' info.capabilities = { 'oss' } info.category = 'oss' linux.sysfs_path = '/sys/class/sound/adsp' 40: udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host_scsi_host' linux.subsystem = 'scsi_host' linux.hotplug_type = 2 (0x2) scsi_host.host = 3 (0x3) info.product = 'SCSI Host Adapter' info.capabilities = { 'scsi_host' } info.category = 'scsi_host' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2' linux.sysfs_path = '/sys/class/scsi_host/host3' 41: udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' info.linux.driver = 'ata_piix' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_host' linux.subsystem = 'scsi_host' linux.hotplug_type = 2 (0x2) scsi_host.host = 2 (0x2) info.product = 'SCSI Host Adapter' info.capabilities = { 'scsi_host' } info.category = 'scsi_host' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2' linux.sysfs_path = '/sys/class/scsi_host/host2' 42: udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host_scsi_host' linux.subsystem = 'scsi_host' linux.hotplug_type = 2 (0x2) scsi_host.host = 1 (0x1) info.product = 'SCSI Host Adapter' info.capabilities = { 'scsi_host' } info.category = 'scsi_host' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1' linux.sysfs_path = '/sys/class/scsi_host/host1' 43: udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' info.linux.driver = 'ata_piix' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_host' linux.subsystem = 'scsi_host' linux.hotplug_type = 2 (0x2) scsi_host.host = 0 (0x0) info.product = 'SCSI Host Adapter' info.capabilities = { 'scsi_host' } info.category = 'scsi_host' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1' linux.sysfs_path = '/sys/class/scsi_host/host0' 44: udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0_scsi_generic' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0_scsi_generic' linux.device_file = '/dev/sg1' linux.subsystem = 'scsi_generic' linux.hotplug_type = 2 (0x2) scsi_generic.device = '/dev/sg1' info.product = 'SCSI Generic Interface' info.capabilities = { 'scsi_generic' } info.category = 'scsi_generic' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0' linux.sysfs_path = '/sys/class/scsi_generic/sg1' 45: udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0_scsi_generic' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0_scsi_generic' linux.device_file = '/dev/sg0' linux.subsystem = 'scsi_generic' linux.hotplug_type = 2 (0x2) scsi_generic.device = '/dev/sg0' info.product = 'SCSI Generic Interface' info.capabilities = { 'scsi_generic' } info.category = 'scsi_generic' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0' linux.sysfs_path = '/sys/class/scsi_generic/sg0' 46: udi = '/org/freedesktop/Hal/devices/net_00_17_f2_d0_53_7b' info.udi = '/org/freedesktop/Hal/devices/net_00_17_f2_d0_53_7b' linux.subsystem = 'net' linux.hotplug_type = 2 (0x2) net.80203.mac_address = 102857986939ull (0x17f2d0537bull) info.product = 'Networking Interface' net.arp_proto_hw_id = 1 (0x1) net.linux.ifindex = 2 (0x2) net.address = '00:17:f2:d0:53:7b' net.interface = 'eth0' net.physical_device = '/org/freedesktop/Hal/devices/pci_11ab_4362' info.capabilities = { 'net', 'net.80203' } info.category = 'net.80203' info.parent = '/org/freedesktop/Hal/devices/pci_11ab_4362' linux.sysfs_path = '/sys/class/net/eth0' 47: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'Sleep Button (CM)' info.product = 'Sleep Button (CM)' linux.device_file = '/dev/input/event9' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event9' info.capabilities = { 'input', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/input/input9/event9' 48: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_1' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'Power Button (CM)' info.product = 'Power Button (CM)' linux.device_file = '/dev/input/event8' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event8' info.capabilities = { 'input', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/input/input8/event8' 49: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'Power Button (FF)' info.product = 'Power Button (FF)' linux.device_file = '/dev/input/event7' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event7' info.capabilities = { 'input', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/input/input7/event7' 50: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0_logicaldev_input' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0_logicaldev_input' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'Apple Mac mini infrared remote control driver' info.product = 'Apple Mac mini infrared remote control driver' linux.device_file = '/dev/input/event6' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event6' info.capabilities = { 'input', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0' input.physical_device = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0' linux.sysfs_path = '/sys/class/input/input6/event6' 51: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1_logicaldev_input' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1_logicaldev_input' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'USBPS2' info.product = 'USBPS2' linux.device_file = '/dev/input/event3' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event3' info.capabilities = { 'input', 'input.mouse', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1' input.physical_device = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1' linux.sysfs_path = '/sys/class/input/input3/event3' 52: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0_logicaldev_input' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0_logicaldev_input' button.has_state = false button.type = '' info.addons = { 'hald-addon-keyboard' } input.product = 'USBPS2' info.product = 'USBPS2' linux.device_file = '/dev/input/event2' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event2' info.capabilities = { 'input', 'input.keyboard', 'button' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0' input.physical_device = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0' linux.sysfs_path = '/sys/class/input/input2/event2' 53: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0_logicaldev_input' input.product = 'Logitech Optical USB Mouse' info.product = 'Logitech Optical USB Mouse' linux.device_file = '/dev/input/event1' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event1' info.capabilities = { 'input', 'input.mouse' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' input.physical_device = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' linux.sysfs_path = '/sys/class/input/input1/event1' 54: udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' input.product = 'Macintosh mouse button emulation' info.product = 'Macintosh mouse button emulation' linux.device_file = '/dev/input/event0' linux.subsystem = 'input' linux.hotplug_type = 2 (0x2) input.device = '/dev/input/event0' info.capabilities = { 'input', 'input.mouse' } info.category = 'input' info.parent = '/org/freedesktop/Hal/devices/computer' linux.sysfs_path = '/sys/class/input/input0/event0' 55: udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'AT Real-Time Clock' pnp.description = 'AT Real-Time Clock' pnp.id = 'PNP0b00' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:08' linux.sysfs_path = '/sys/devices/pnp0/00:08' 56: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' pnp.id = 'PNP0c02' info.linux.driver = 'system' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:07' linux.sysfs_path = '/sys/devices/pnp0/00:07' 57: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'Math Coprocessor' pnp.description = 'Math Coprocessor' pnp.id = 'PNP0c04' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:06' linux.sysfs_path = '/sys/devices/pnp0/00:06' 58: udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0103' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'PnP Device (PNP0103)' pnp.id = 'PNP0103' info.linux.driver = 'system' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:05' linux.sysfs_path = '/sys/devices/pnp0/00:05' 59: udi = '/org/freedesktop/Hal/devices/pnp_INT0800' info.udi = '/org/freedesktop/Hal/devices/pnp_INT0800' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'PnP Device (INT0800)' pnp.id = 'INT0800' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:04' linux.sysfs_path = '/sys/devices/pnp0/00:04' 60: udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'AT DMA Controller' pnp.description = 'AT DMA Controller' pnp.id = 'PNP0200' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:03' linux.sysfs_path = '/sys/devices/pnp0/00:03' 61: udi = '/org/freedesktop/Hal/devices/pnp_APP0001' info.udi = '/org/freedesktop/Hal/devices/pnp_APP0001' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'PnP Device (APP0001)' pnp.id = 'APP0001' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:02' linux.sysfs_path = '/sys/devices/pnp0/00:02' 62: udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' pnp.id = 'PNP0c02' info.linux.driver = 'system' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:01' linux.sysfs_path = '/sys/devices/pnp0/00:01' 63: udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' linux.subsystem = 'pnp' linux.hotplug_type = 1 (0x1) info.product = 'PnP Device (PNP0a08)' pnp.id = 'PNP0a08' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pnp' linux.sysfs_path_device = '/sys/devices/pnp0/00:00' linux.sysfs_path = '/sys/devices/pnp0/00:00' 64: udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' info.udi = '/org/freedesktop/Hal/devices/platform_vesafb_0' linux.subsystem = 'platform' linux.hotplug_type = 1 (0x1) info.product = 'Platform Device (vesafb.0)' platform.id = 'vesafb.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'platform' linux.sysfs_path_device = '/sys/devices/platform/vesafb.0' linux.sysfs_path = '/sys/devices/platform/vesafb.0' 65: udi = '/org/freedesktop/Hal/devices/platform_serial8250' info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' linux.subsystem = 'platform' linux.hotplug_type = 1 (0x1) info.product = 'Platform Device (serial8250)' platform.id = 'serial8250' info.linux.driver = 'serial8250' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'platform' linux.sysfs_path_device = '/sys/devices/platform/serial8250' linux.sysfs_path = '/sys/devices/platform/serial8250' 66: udi = '/org/freedesktop/Hal/devices/platform_pcspkr' info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' linux.subsystem = 'platform' linux.hotplug_type = 1 (0x1) info.product = 'Platform Device (pcspkr)' platform.id = 'pcspkr' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'platform' linux.sysfs_path_device = '/sys/devices/platform/pcspkr' linux.sysfs_path = '/sys/devices/platform/pcspkr' 67: udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' info.udi = '/org/freedesktop/Hal/devices/platform_iTCO_wdt' linux.subsystem = 'platform' linux.hotplug_type = 1 (0x1) info.product = 'Platform Device (iTCO_wdt)' platform.id = 'iTCO_wdt' info.linux.driver = 'iTCO_wdt' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'platform' linux.sysfs_path_device = '/sys/devices/platform/iTCO_wdt' linux.sysfs_path = '/sys/devices/platform/iTCO_wdt' 68: udi = '/org/freedesktop/Hal/devices/pci_8086_27da' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27da' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) SMBus Controller' pci.product = '82801G (ICH7 Family) SMBus Controller' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 5 (0x5) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10202 (0x27da) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.3' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.3' 69: udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4_scsi_device_lun0' linux.subsystem = 'scsi' linux.hotplug_type = 1 (0x1) scsi.type = 'disk' scsi.vendor = 'ATA' scsi.model = 'WDC WD2500JS-40T' info.product = 'SCSI Device' info.linux.driver = 'sd' scsi.lun = 0 (0x0) scsi.target = 1 (0x1) scsi.bus = 0 (0x0) scsi.host = 2 (0x2) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c4' info.bus = 'scsi' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:1/2:0:1:0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host2/target2:0:1/2:0:1:0' 70: udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c4' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE' pci.product = '82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 143 (0x8f) pci.device_subclass = 1 (0x1) pci.device_class = 1 (0x1) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10180 (0x27c4) info.linux.driver = 'ata_piix' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.2' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2' 71: udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df_scsi_device_lun0' linux.subsystem = 'scsi' linux.hotplug_type = 1 (0x1) scsi.type = 'cdrom' scsi.vendor = 'MATSHITA' scsi.model = 'DVD-R UJ-85J' info.product = 'SCSI Device' info.linux.driver = 'sr' scsi.lun = 0 (0x0) scsi.target = 0 (0x0) scsi.bus = 0 (0x0) scsi.host = 0 (0x0) info.parent = '/org/freedesktop/Hal/devices/pci_8086_27df' info.bus = 'scsi' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0' 72: udi = '/org/freedesktop/Hal/devices/pci_8086_27df' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27df' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) IDE Controller' pci.product = '82801G (ICH7 Family) IDE Controller' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 138 (0x8a) pci.device_subclass = 1 (0x1) pci.device_class = 1 (0x1) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10207 (0x27df) info.linux.driver = 'ata_piix' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.1' 73: udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27b9' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801GBM (ICH7-M) LPC Interface Bridge' pci.product = '82801GBM (ICH7-M) LPC Interface Bridge' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 1 (0x1) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10169 (0x27b9) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1f.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.0' 74: udi = '/org/freedesktop/Hal/devices/ieee1394_guid_19e3fffe75e472' info.udi = '/org/freedesktop/Hal/devices/ieee1394_guid_19e3fffe75e472' linux.subsystem = 'ieee1394' linux.hotplug_type = 1 (0x1) info.product = 'Unknown (0x0019e3)' info.vendor = 'Unknown (0x0019e3)' ieee1394.product = 'Unknown (0x0019e3)' ieee1394.product_id = 0 (0x0) ieee1394.vendor = 'Unknown (0x0019e3)' ieee1394.version = 1 (0x1) ieee1394.specifier_id = 94 (0x5e) ieee1394.vendor_id = 6627 (0x19e3) ieee1394.guid = 7287563043071090ull (0x19e3fffe75e472ull) info.parent = '/org/freedesktop/Hal/devices/pci_104c_8025' info.bus = 'ieee1394' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0/fw-host0/0019e3fffe75e472/0019e3fffe75e472-0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0/fw-host0/0019e3fffe75e472/0019e3fffe75e472-0' 75: udi = '/org/freedesktop/Hal/devices/pci_104c_8025' info.udi = '/org/freedesktop/Hal/devices/pci_104c_8025' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = 'TSB82AA2 IEEE-1394b Link Layer Controller' pci.product = 'TSB82AA2 IEEE-1394b Link Layer Controller' info.vendor = 'Texas Instruments' pci.vendor = 'Texas Instruments' pci.device_protocol = 16 (0x10) pci.device_subclass = 0 (0x0) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 4172 (0x104c) pci.product_id = 32805 (0x8025) info.linux.driver = 'ohci1394' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2448' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:04:03.0' 76: udi = '/org/freedesktop/Hal/devices/pci_8086_2448' info.udi = '/org/freedesktop/Hal/devices/pci_8086_2448' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = '82801 Mobile PCI Bridge' pci.product = '82801 Mobile PCI Bridge' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 1 (0x1) pci.device_subclass = 4 (0x4) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 32902 (0x8086) pci.product_id = 9288 (0x2448) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1e.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0' 77: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Vendor Specific Interface' usb.interface.protocol = 255 (0xff) usb.interface.subclass = 255 (0xff) usb.interface.class = 255 (0xff) usb.interface.number = 0 (0x0) usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 255 (0xff) usb.device_subclass = 255 (0xff) usb.device_protocol = 255 (0xff) usb.vendor_id = 1452 (0x5ac) usb.product_id = 33536 (0x8300) usb.vendor = 'Unknown (0x05ac)' usb.product = 'USB Vendor Specific Interface' usb.device_revision_bcd = 269 (0x10d) usb.max_power = 100 (0x64) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 294912 (0x48000) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = false usb.bus_number = 5 (0x5) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4/5-4:1.0' 78: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8300_noserial' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 5 (0x5) usb_device.can_wake_up = false usb_device.is_self_powered = false usb_device.version_bcd = 512 (0x200) usb_device.speed_bcd = 294912 (0x48000) usb_device.linux.device_number = 4 (0x4) usb_device.num_ports = 0 (0x0) usb_device.max_power = 100 (0x64) usb_device.device_revision_bcd = 269 (0x10d) info.product = 'Unknown (0x8300)' usb_device.product = 'Unknown (0x8300)' info.vendor = 'Unknown (0x05ac)' usb_device.vendor = 'Unknown (0x05ac)' usb_device.product_id = 33536 (0x8300) usb_device.vendor_id = 1452 (0x5ac) usb_device.device_protocol = 255 (0xff) usb_device.device_subclass = 255 (0xff) usb_device.device_class = 255 (0xff) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-4' 79: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Hub Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 9 (0x9) usb.interface.number = 0 (0x0) info.linux.driver = 'hub' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 9 (0x9) usb.device_subclass = 0 (0x0) usb.device_protocol = 1 (0x1) usb.vendor_id = 0 (0x0) usb.product_id = 0 (0x0) usb.vendor = 'Linux 2.6.20-16-generic ehci_hcd' usb.product = 'USB Hub Interface' usb.device_revision_bcd = 518 (0x206) usb.max_power = 0 (0x0) usb.num_ports = 8 (0x8) usb.linux.device_number = 1 (0x1) usb.serial = '0000:00:1d.7' usb.speed_bcd = 294912 (0x48000) usb.version_bcd = 512 (0x200) usb.is_self_powered = true usb.can_wake_up = true usb.bus_number = 5 (0x5) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' 80: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 5 (0x5) usb_device.can_wake_up = true usb_device.is_self_powered = true usb_device.version_bcd = 512 (0x200) usb_device.speed_bcd = 294912 (0x48000) usb_device.serial = '0000:00:1d.7' usb_device.linux.device_number = 1 (0x1) usb_device.num_ports = 8 (0x8) usb_device.max_power = 0 (0x0) usb_device.device_revision_bcd = 518 (0x206) info.product = 'EHCI Host Controller' usb_device.product = 'EHCI Host Controller' info.vendor = 'Linux 2.6.20-16-generic ehci_hcd' usb_device.vendor = 'Linux 2.6.20-16-generic ehci_hcd' usb_device.product_id = 0 (0x0) usb_device.vendor_id = 0 (0x0) usb_device.device_protocol = 1 (0x1) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 9 (0x9) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cc' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5' 81: udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cc' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) USB2 EHCI Controller' pci.product = '82801G (ICH7 Family) USB2 EHCI Controller' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 32 (0x20) pci.device_subclass = 3 (0x3) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10188 (0x27cc) info.linux.driver = 'ehci_hcd' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7' 82: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB HID Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 3 (0x3) usb.interface.number = 0 (0x0) info.linux.driver = 'appleir' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 0 (0x0) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 1452 (0x5ac) usb.product_id = 33344 (0x8240) usb.vendor = 'Apple Computer, Inc.' usb.product = 'USB HID Interface' usb.device_revision_bcd = 272 (0x110) usb.max_power = 100 (0x64) usb.num_ports = 0 (0x0) usb.linux.device_number = 3 (0x3) usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = true usb.bus_number = 4 (0x4) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0' 83: udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_5ac_8240_noserial' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 4 (0x4) usb_device.can_wake_up = true usb_device.is_self_powered = false usb_device.version_bcd = 512 (0x200) usb_device.speed_bcd = 4608 (0x1200) usb_device.linux.device_number = 3 (0x3) usb_device.num_ports = 0 (0x0) usb_device.max_power = 100 (0x64) usb_device.device_revision_bcd = 272 (0x110) info.product = 'IR Receiver' usb_device.product = 'IR Receiver' info.vendor = 'Apple Computer, Inc.' usb_device.vendor = 'Apple Computer, Inc.' usb_device.product_id = 33344 (0x8240) usb_device.vendor_id = 1452 (0x5ac) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 0 (0x0) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-2' 84: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Hub Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 9 (0x9) usb.interface.number = 0 (0x0) info.linux.driver = 'hub' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 9 (0x9) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 0 (0x0) usb.product_id = 0 (0x0) usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb.product = 'USB Hub Interface' usb.device_revision_bcd = 518 (0x206) usb.max_power = 0 (0x0) usb.num_ports = 2 (0x2) usb.linux.device_number = 1 (0x1) usb.serial = '0000:00:1d.3' usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 272 (0x110) usb.is_self_powered = true usb.can_wake_up = true usb.bus_number = 4 (0x4) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' 85: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 4 (0x4) usb_device.can_wake_up = true usb_device.is_self_powered = true usb_device.version_bcd = 272 (0x110) usb_device.speed_bcd = 4608 (0x1200) usb_device.serial = '0000:00:1d.3' usb_device.linux.device_number = 1 (0x1) usb_device.num_ports = 2 (0x2) usb_device.max_power = 0 (0x0) usb_device.device_revision_bcd = 518 (0x206) info.product = 'UHCI Host Controller' usb_device.product = 'UHCI Host Controller' info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.product_id = 0 (0x0) usb_device.vendor_id = 0 (0x0) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 9 (0x9) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' 86: udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) USB UHCI #4' pci.product = '82801G (ICH7 Family) USB UHCI #4' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 3 (0x3) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10187 (0x27cb) info.linux.driver = 'uhci_hcd' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' 87: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Hub Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 9 (0x9) usb.interface.number = 0 (0x0) info.linux.driver = 'hub' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 9 (0x9) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 0 (0x0) usb.product_id = 0 (0x0) usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb.product = 'USB Hub Interface' usb.device_revision_bcd = 518 (0x206) usb.max_power = 0 (0x0) usb.num_ports = 2 (0x2) usb.linux.device_number = 1 (0x1) usb.serial = '0000:00:1d.2' usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 272 (0x110) usb.is_self_powered = true usb.can_wake_up = true usb.bus_number = 3 (0x3) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' 88: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 3 (0x3) usb_device.can_wake_up = true usb_device.is_self_powered = true usb_device.version_bcd = 272 (0x110) usb_device.speed_bcd = 4608 (0x1200) usb_device.serial = '0000:00:1d.2' usb_device.linux.device_number = 1 (0x1) usb_device.num_ports = 2 (0x2) usb_device.max_power = 0 (0x0) usb_device.device_revision_bcd = 518 (0x206) info.product = 'UHCI Host Controller' usb_device.product = 'UHCI Host Controller' info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.product_id = 0 (0x0) usb_device.vendor_id = 0 (0x0) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 9 (0x9) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' 89: udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) USB UHCI #3' pci.product = '82801G (ICH7 Family) USB UHCI #3' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 3 (0x3) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10186 (0x27ca) info.linux.driver = 'uhci_hcd' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' 90: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB HID Interface' usb.interface.protocol = 2 (0x2) usb.interface.subclass = 1 (0x1) usb.interface.class = 3 (0x3) usb.interface.number = 0 (0x0) info.linux.driver = 'usbhid' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 0 (0x0) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 1133 (0x46d) usb.product_id = 49174 (0xc016) usb.vendor = 'Logitech' usb.product = 'USB HID Interface' usb.device_revision_bcd = 832 (0x340) usb.max_power = 100 (0x64) usb.num_ports = 0 (0x0) usb.linux.device_number = 2 (0x2) usb.speed_bcd = 336 (0x150) usb.version_bcd = 512 (0x200) usb.is_self_powered = false usb.can_wake_up = true usb.bus_number = 2 (0x2) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0' 91: udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c016_noserial' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 2 (0x2) usb_device.can_wake_up = true usb_device.is_self_powered = false usb_device.version_bcd = 512 (0x200) usb_device.speed_bcd = 336 (0x150) usb_device.linux.device_number = 2 (0x2) usb_device.num_ports = 0 (0x0) usb_device.max_power = 100 (0x64) usb_device.device_revision_bcd = 832 (0x340) info.product = 'Optical USB Mouse' usb_device.product = 'Optical USB Mouse' info.vendor = 'Logitech' usb_device.vendor = 'Logitech' usb_device.product_id = 49174 (0xc016) usb_device.vendor_id = 1133 (0x46d) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 0 (0x0) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-1' 92: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Hub Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 9 (0x9) usb.interface.number = 0 (0x0) info.linux.driver = 'hub' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 9 (0x9) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 0 (0x0) usb.product_id = 0 (0x0) usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb.product = 'USB Hub Interface' usb.device_revision_bcd = 518 (0x206) usb.max_power = 0 (0x0) usb.num_ports = 2 (0x2) usb.linux.device_number = 1 (0x1) usb.serial = '0000:00:1d.1' usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 272 (0x110) usb.is_self_powered = true usb.can_wake_up = true usb.bus_number = 2 (0x2) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' 93: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 2 (0x2) usb_device.can_wake_up = true usb_device.is_self_powered = true usb_device.version_bcd = 272 (0x110) usb_device.speed_bcd = 4608 (0x1200) usb_device.serial = '0000:00:1d.1' usb_device.linux.device_number = 1 (0x1) usb_device.num_ports = 2 (0x2) usb_device.max_power = 0 (0x0) usb_device.device_revision_bcd = 518 (0x206) info.product = 'UHCI Host Controller' usb_device.product = 'UHCI Host Controller' info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.product_id = 0 (0x0) usb_device.vendor_id = 0 (0x0) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 9 (0x9) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' 94: udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) USB UHCI #2' pci.product = '82801G (ICH7 Family) USB UHCI #2' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 3 (0x3) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10185 (0x27c9) info.linux.driver = 'uhci_hcd' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' 95: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if1' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB HID Interface' usb.interface.protocol = 2 (0x2) usb.interface.subclass = 1 (0x1) usb.interface.class = 3 (0x3) usb.interface.number = 1 (0x1) info.linux.driver = 'usbhid' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 2 (0x2) usb.device_class = 0 (0x0) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 3389 (0xd3d) usb.product_id = 1 (0x1) usb.vendor = 'Unknown (0x0d3d)' usb.product = 'USB HID Interface' usb.device_revision_bcd = 1 (0x1) usb.max_power = 100 (0x64) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 336 (0x150) usb.version_bcd = 272 (0x110) usb.is_self_powered = false usb.can_wake_up = true usb.bus_number = 1 (0x1) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1' 96: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB HID Interface' usb.interface.protocol = 1 (0x1) usb.interface.subclass = 1 (0x1) usb.interface.class = 3 (0x3) usb.interface.number = 0 (0x0) info.linux.driver = 'usbhid' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 2 (0x2) usb.device_class = 0 (0x0) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 3389 (0xd3d) usb.product_id = 1 (0x1) usb.vendor = 'Unknown (0x0d3d)' usb.product = 'USB HID Interface' usb.device_revision_bcd = 1 (0x1) usb.max_power = 100 (0x64) usb.num_ports = 0 (0x0) usb.linux.device_number = 4 (0x4) usb.speed_bcd = 336 (0x150) usb.version_bcd = 272 (0x110) usb.is_self_powered = false usb.can_wake_up = true usb.bus_number = 1 (0x1) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0' 97: udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial' info.udi = '/org/freedesktop/Hal/devices/usb_device_d3d_1_noserial' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 1 (0x1) usb_device.can_wake_up = true usb_device.is_self_powered = false usb_device.version_bcd = 272 (0x110) usb_device.speed_bcd = 336 (0x150) usb_device.linux.device_number = 4 (0x4) usb_device.num_ports = 0 (0x0) usb_device.max_power = 100 (0x64) usb_device.device_revision_bcd = 1 (0x1) info.product = 'USBPS2' usb_device.product = 'USBPS2' info.vendor = 'Unknown (0x0d3d)' usb_device.vendor = 'Unknown (0x0d3d)' usb_device.product_id = 1 (0x1) usb_device.vendor_id = 3389 (0xd3d) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 0 (0x0) usb_device.num_interfaces = 2 (0x2) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1' 98: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) info.product = 'USB Hub Interface' usb.interface.protocol = 0 (0x0) usb.interface.subclass = 0 (0x0) usb.interface.class = 9 (0x9) usb.interface.number = 0 (0x0) info.linux.driver = 'hub' usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' usb.configuration_value = 1 (0x1) usb.num_configurations = 1 (0x1) usb.num_interfaces = 1 (0x1) usb.device_class = 9 (0x9) usb.device_subclass = 0 (0x0) usb.device_protocol = 0 (0x0) usb.vendor_id = 0 (0x0) usb.product_id = 0 (0x0) usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb.product = 'USB Hub Interface' usb.device_revision_bcd = 518 (0x206) usb.max_power = 0 (0x0) usb.num_ports = 2 (0x2) usb.linux.device_number = 1 (0x1) usb.serial = '0000:00:1d.0' usb.speed_bcd = 4608 (0x1200) usb.version_bcd = 272 (0x110) usb.is_self_powered = true usb.can_wake_up = true usb.bus_number = 1 (0x1) info.bus = 'usb' info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' 99: udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' linux.subsystem = 'usb' linux.hotplug_type = 1 (0x1) usb_device.bus_number = 1 (0x1) usb_device.can_wake_up = true usb_device.is_self_powered = true usb_device.version_bcd = 272 (0x110) usb_device.speed_bcd = 4608 (0x1200) usb_device.serial = '0000:00:1d.0' usb_device.linux.device_number = 1 (0x1) usb_device.num_ports = 2 (0x2) usb_device.max_power = 0 (0x0) usb_device.device_revision_bcd = 518 (0x206) info.product = 'UHCI Host Controller' usb_device.product = 'UHCI Host Controller' info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' usb_device.product_id = 0 (0x0) usb_device.vendor_id = 0 (0x0) usb_device.device_protocol = 0 (0x0) usb_device.device_subclass = 0 (0x0) usb_device.device_class = 9 (0x9) usb_device.num_interfaces = 1 (0x1) usb_device.num_configurations = 1 (0x1) usb_device.configuration_value = 1 (0x1) usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' info.linux.driver = 'usb' info.bus = 'usb_device' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' 100: udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = '82801G (ICH7 Family) USB UHCI #1' pci.product = '82801G (ICH7 Family) USB UHCI #1' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 3 (0x3) pci.device_class = 12 (0xc) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10184 (0x27c8) info.linux.driver = 'uhci_hcd' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' 101: udi = '/org/freedesktop/Hal/devices/pci_14e4_4328' info.udi = '/org/freedesktop/Hal/devices/pci_14e4_4328' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0087)' pci.subsys_vendor = 'Apple Computer Inc.' info.product = 'Unknown (0x4328)' pci.product = 'Unknown (0x4328)' info.vendor = 'Broadcom Corporation' pci.vendor = 'Broadcom Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 128 (0x80) pci.device_class = 2 (0x2) pci.subsys_vendor_id = 4203 (0x106b) pci.subsys_product_id = 135 (0x87) pci.vendor_id = 5348 (0x14e4) pci.product_id = 17192 (0x4328) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d2' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' 102: udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d2' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = '82801G (ICH7 Family) PCI Express Port 2' pci.product = '82801G (ICH7 Family) PCI Express Port 2' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 4 (0x4) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 32902 (0x8086) pci.product_id = 10194 (0x27d2) info.linux.driver = 'pcieport-driver' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.1' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.1' 103: udi = '/org/freedesktop/Hal/devices/pci_11ab_4362' info.udi = '/org/freedesktop/Hal/devices/pci_11ab_4362' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Marvell RDK-8053' pci.subsys_vendor = 'Marvell Technology Group Ltd.' info.product = '88E8053 PCI-E Gigabit Ethernet Controller' pci.product = '88E8053 PCI-E Gigabit Ethernet Controller' info.vendor = 'Marvell Technology Group Ltd.' pci.vendor = 'Marvell Technology Group Ltd.' pci.device_protocol = 0 (0x0) pci.device_subclass = 0 (0x0) pci.device_class = 2 (0x2) pci.subsys_vendor_id = 4523 (0x11ab) pci.subsys_product_id = 21281 (0x5321) pci.vendor_id = 4523 (0x11ab) pci.product_id = 17250 (0x4362) info.linux.driver = 'sky2' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d0' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0' 104: udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d0' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = '82801G (ICH7 Family) PCI Express Port 1' pci.product = '82801G (ICH7 Family) PCI Express Port 1' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 4 (0x4) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 32902 (0x8086) pci.product_id = 10192 (0x27d0) info.linux.driver = 'pcieport-driver' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1c.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.0' 105: udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0885)' pci.subsys_vendor = 'Realtek Semiconductor Co., Ltd.' info.product = '82801G (ICH7 Family) High Definition Audio Controller' pci.product = '82801G (ICH7 Family) High Definition Audio Controller' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 3 (0x3) pci.device_class = 4 (0x4) pci.subsys_vendor_id = 4332 (0x10ec) pci.subsys_product_id = 2181 (0x885) pci.vendor_id = 32902 (0x8086) pci.product_id = 10200 (0x27d8) info.linux.driver = 'HDA Intel' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1b.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' 106: udi = '/org/freedesktop/Hal/devices/pci_8086_27a3' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a3' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = 'Unknown (0x27a3)' pci.product = 'Unknown (0x27a3)' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 1 (0x1) pci.device_class = 17 (0x11) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 32902 (0x8086) pci.product_id = 10147 (0x27a3) pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:07.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' 107: udi = '/org/freedesktop/Hal/devices/pci_10de_395' info.udi = '/org/freedesktop/Hal/devices/pci_10de_395' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0402)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = 'Unknown (0x0395)' pci.product = 'Unknown (0x0395)' info.vendor = 'nVidia Corporation' pci.vendor = 'nVidia Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 0 (0x0) pci.device_class = 3 (0x3) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 1026 (0x402) pci.vendor_id = 4318 (0x10de) pci.product_id = 917 (0x395) info.linux.driver = 'nvidia' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' info.parent = '/org/freedesktop/Hal/devices/pci_8086_27a1' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' 108: udi = '/org/freedesktop/Hal/devices/pci_8086_27a1' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a1' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x0000)' pci.subsys_vendor = 'Unknown (0x0000)' info.product = 'Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port' pci.product = 'Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 4 (0x4) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 0 (0x0) pci.subsys_product_id = 0 (0x0) pci.vendor_id = 32902 (0x8086) pci.product_id = 10145 (0x27a1) info.linux.driver = 'pcieport-driver' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' 109: udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' info.udi = '/org/freedesktop/Hal/devices/pci_8086_27a0' linux.subsystem = 'pci' linux.hotplug_type = 1 (0x1) pci.subsys_product = 'Unknown (0x7270)' pci.subsys_vendor = 'Intel Corporation' info.product = 'Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub' pci.product = 'Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub' info.vendor = 'Intel Corporation' pci.vendor = 'Intel Corporation' pci.device_protocol = 0 (0x0) pci.device_subclass = 0 (0x0) pci.device_class = 6 (0x6) pci.subsys_vendor_id = 32902 (0x8086) pci.subsys_product_id = 29296 (0x7270) pci.vendor_id = 32902 (0x8086) pci.product_id = 10144 (0x27a0) info.linux.driver = 'agpgart-intel' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' info.parent = '/org/freedesktop/Hal/devices/computer' info.bus = 'pci' linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' 110: udi = '/org/freedesktop/Hal/devices/computer' info.capabilities = { 'cpufreq_control' } info.callouts.add = { 'hal-storage-cleanup-all-mountpoints' } org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = { 'hal-system-power-suspend', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save' } org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = { 'num_seconds_to_sleep', '', '', '', 'enable_power_save' } org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = { 'i', '', '', '', 'b' } org.freedesktop.Hal.Device.SystemPowerManagement.method_names = { 'Suspend', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave' } info.interfaces = { 'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq' } info.addons = { 'hald-addon-acpi', 'hald-addon-cpufreq' } system.formfactor = 'unknown' system.product = 'iMac6,1 1.0' system.vendor = 'Apple Computer, Inc.' smbios.chassis.type = 'All In One' smbios.chassis.manufacturer = 'Apple Computer, Inc.' smbios.system.uuid = '4458278E-8F17-A844-ACEB-A7D7E5178C63' smbios.system.serial = 'W8708032WSG' smbios.system.version = '1.0' smbios.system.product = 'iMac6,1' smbios.system.manufacturer = 'Apple Computer, Inc.' smbios.bios.release_date = '12/15/06' smbios.bios.version = ' IM61.88Z.0093.B05.0612151318' smbios.bios.vendor = 'Apple Computer, Inc.' power_management.can_suspend_to_disk = true power_management.can_suspend_to_ram = true power_management.can_hibernate = true power_management.can_suspend = true power_management.acpi.linux.version = '20060707' power_management.type = 'acpi' system.kernel.machine = 'x86_64' system.kernel.version = '2.6.20-16-generic' system.kernel.name = 'Linux' info.udi = '/org/freedesktop/Hal/devices/computer' info.product = 'Computer' linux.sysfs_path_device = '(none)' info.bus = 'unknown' ----- hal device list end ----- >> floppy.1: get nvram >> floppy.2: klog info >> bios.1: cmdline >> bios.1.1: apm >> bios.2: ram bios: 0 disks >> bios.2: rom >> bios.3: smp ----- BIOS data 0x00400 - 0x004ff ----- 400 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 410 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 420 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 430 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 440 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 450 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 460 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 470 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 480 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 490 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 4f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" ----- BIOS data end ----- >> bios.4: vbe VBE: Could not init Int10 >> bios.5: 32 >> bios.6: acpi >> sys.1: cpu >> misc.9: kernel log ----- kernel log ----- <3>[ 30.653974] ata_piix 0000:00:1f.2: invalid MAP value 0 <6>[ 30.809838] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 <7>[ 30.809865] PCI: Setting latency timer of device 0000:00:1f.2 to 64 <6>[ 30.809916] ata3: SATA max UDMA/133 cmd 0x00000000000130d8 ctl 0x00000000000130f6 bmdma 0x0000000000013020 irq 19 <6>[ 30.809964] ata4: SATA max UDMA/133 cmd 0x00000000000130d0 ctl 0x00000000000130f2 bmdma 0x0000000000013028 irq 19 <6>[ 30.809977] scsi2 : ata_piix <4>[ 30.978253] ATA: abnormal status 0x7F on port 0x00000000000130df <4>[ 30.989345] ATA: abnormal status 0x7F on port 0x00000000000130df <6>[ 31.037377] ata3.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 <6>[ 31.037384] ata3.01: ATA-7: WDC WD2500JS-40TGB0, 20.06C04, max UDMA/133 <6>[ 31.037390] ata3.01: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) <6>[ 31.048800] ata3.01: ata_hpa_resize 1: sectors = 488397168, hpa_sectors = 488397168 <6>[ 31.048807] ata3.01: configured for UDMA/133 <6>[ 31.048819] scsi3 : ata_piix <4>[ 31.215178] ATA: abnormal status 0x7F on port 0x00000000000130d7 <5>[ 31.215244] scsi 2:0:1:0: Direct-Access ATA WDC WD2500JS-40T 20.0 PQ: 0 ANSI: 5 <7>[ 31.215314] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe75e472] <4>[ 31.232757] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray <6>[ 31.232763] Uniform CD-ROM driver Revision: 3.20 <7>[ 31.232995] sr 0:0:0:0: Attached scsi CD-ROM sr0 <5>[ 31.233185] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) <5>[ 31.233193] sda: Write Protect is off <7>[ 31.233195] sda: Mode Sense: 00 3a 00 00 <5>[ 31.233207] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <5>[ 31.233240] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) <5>[ 31.233247] sda: Write Protect is off <7>[ 31.233249] sda: Mode Sense: 00 3a 00 00 <5>[ 31.233260] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 31.233264] sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5 <5>[ 31.235243] sd 2:0:1:0: Attached scsi generic sg1 type 0 <4>[ 31.277811] sda1 sda2 sda3 <5>[ 31.277955] sd 2:0:1:0: Attached scsi disk sda <6>[ 31.504431] kjournald starting. Commit interval 5 seconds <6>[ 31.504444] EXT3-fs: mounted filesystem with ordered data mode. <6>[ 31.530683] usb 5-4: new high speed USB device using ehci_hcd and address 4 <6>[ 31.660149] usb 5-4: configuration #1 chosen from 1 choice <6>[ 32.265587] usb 2-1: new low speed USB device using uhci_hcd and address 2 <6>[ 32.442711] usb 2-1: configuration #1 chosen from 1 choice <6>[ 32.685874] usb 1-1: new low speed USB device using uhci_hcd and address 4 <6>[ 32.855704] usb 1-1: configuration #1 chosen from 1 choice <6>[ 33.122563] usb 4-1: new full speed USB device using uhci_hcd and address 2 <6>[ 33.310887] usb 4-1: configuration #1 chosen from 1 choice <6>[ 33.555037] usb 4-2: new full speed USB device using uhci_hcd and address 3 <6>[ 33.739169] usb 4-2: configuration #1 chosen from 1 choice <6>[ 40.013062] agpgart: Detected an Intel 945GM Chipset. <6>[ 40.029443] agpgart: AGP aperture is 256M @ 0x0 <6>[ 40.092901] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>[ 40.094550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>[ 40.124421] iTCO_vendor_support: vendor-support=0 <4>[ 40.158103] applesmc: supported laptop not found! <4>[ 40.158107] applesmc: driver init failed (ret=-19)! <6>[ 40.241274] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>[ 40.241288] PCI: Setting latency timer of device 0000:02:00.0 to 64 <6>[ 40.241317] sky2 0000:02:00.0: v1.13 addr 0x8a300000 irq 16 Yukon-EC (0xb6) rev 2 <6>[ 40.241537] sky2 eth0: addr 00:17:f2:d0:53:7b <6>[ 40.248473] sky2 eth0: enabling interface <6>[ 40.250342] sky2 eth0: ram buffer 48K <6>[ 40.281207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) <6>[ 40.281285] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0460) <6>[ 40.281327] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) <6>[ 40.456989] usbcore: registered new interface driver hiddev <3>[ 40.489270] intel_rng: FWH not detected <4>[ 40.514907] nvidia: module license 'NVIDIA' taints kernel. <6>[ 40.568500] input: Logitech Optical USB Mouse as /class/input/input1 <6>[ 40.568580] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 <6>[ 40.676398] input: USBPS2 as /class/input/input2 <6>[ 40.676431] input: USB HID v1.00 Keyboard [USBPS2] on usb-0000:00:1d.0-1 <6>[ 40.697414] input: USBPS2 as /class/input/input3 <6>[ 40.697491] input: USB HID v1.00 Mouse [USBPS2] on usb-0000:00:1d.0-1 <6>[ 40.768121] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 <7>[ 40.768130] PCI: Setting latency timer of device 0000:01:00.0 to 64 <4>[ 40.768303] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 <6>[ 40.812250] input: HID 05ac:1000 as /class/input/input4 <6>[ 40.812292] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 <6>[ 40.835160] input: HID 05ac:1000 as /class/input/input5 <6>[ 40.835232] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 <6>[ 40.885978] usbcore: registered new interface driver usbhid <6>[ 40.885985] drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>[ 40.886005] usbcore: registered new interface driver xpad <6>[ 40.886009] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6 <6>[ 40.919992] input: Apple Mac mini infrared remote control driver as /class/input/input6 <6>[ 40.920024] usbcore: registered new interface driver appleir <6>[ 40.920027] ubuntu/mactel/appleir.c: v1.1:USB Apple MacMini IR Receiver driver <6>[ 40.971555] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 <7>[ 40.971576] PCI: Setting latency timer of device 0000:00:1b.0 to 64 <6>[ 41.181710] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... <6>[ 41.383460] NET: Registered protocol family 17 <4>[ 41.439660] fuse init (API version 7.8) <6>[ 41.503051] lp: driver loaded but no devices found <6>[ 41.733744] EXT3 FS on sda3, internal journal <6>[ 41.895107] sky2 eth0: Link is up at 100 Mbps, half duplex, flow control none <6>[ 45.528994] NET: Registered protocol family 10 <6>[ 45.529069] lo: Disabled Privacy Extensions <3>[ 48.534487] ibm_acpi: ec object not found <6>[ 48.575020] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 48.583639] Using specific hotkey driver <6>[ 48.609926] No dock devices found. <6>[ 48.617051] input: Power Button (FF) as /class/input/input7 <6>[ 48.617073] ACPI: Power Button (FF) [PWRF] <6>[ 48.617106] input: Power Button (CM) as /class/input/input8 <6>[ 48.617121] ACPI: Power Button (CM) [PWRB] <6>[ 48.617146] input: Sleep Button (CM) as /class/input/input9 <6>[ 48.617160] ACPI: Sleep Button (CM) [SLPB] <6>[ 48.707792] pcc_acpi: loading... <6>[ 54.942697] ppdev: user-space parallel port driver <6>[ 55.606370] Bluetooth: Core ver 2.11 <6>[ 55.606643] NET: Registered protocol family 31 <6>[ 55.606646] Bluetooth: HCI device and connection manager initialized <6>[ 55.606649] Bluetooth: HCI socket layer initialized <6>[ 55.635344] Bluetooth: L2CAP ver 2.8 <6>[ 55.635350] Bluetooth: L2CAP socket layer initialized <7>[ 55.732854] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 <6>[ 55.748166] Bluetooth: RFCOMM socket layer initialized <6>[ 55.748184] Bluetooth: RFCOMM TTY layer initialized <6>[ 55.748188] Bluetooth: RFCOMM ver 1.8 <6>[ 55.821051] usb 4-1: USB disconnect, address 2 <6>[ 56.563681] usb 4-1: new full speed USB device using uhci_hcd and address 4 <6>[ 56.767244] usb 4-1: configuration #1 chosen from 1 choice <6>[ 56.862689] Bluetooth: HCI USB driver ver 2.9 <6>[ 56.867406] usbcore: registered new interface driver hci_usb <7>[ 69.817915] eth0: no IPv6 routers present ----- kernel log end ----- >> misc.1: misc data >> misc.1.1: open serial >> misc.1.2: open parallel ----- exec: "/sbin/rmmod lp" ----- ERROR: Removing 'lp': Operation not permitted ----- return code: ? ----- ----- exec: "/sbin/rmmod parport_pc" ----- ERROR: Removing 'parport_pc': Operation not permitted ----- return code: ? ----- ----- exec: "/sbin/rmmod parport" ----- ERROR: Module parport is in use by ppdev,parport_pc,lp ----- return code: ? ----- >> misc.2.1: io >> misc.2.2: dma >> misc.2.3: irq ----- /proc/ioports ----- 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:1f.1 0170-0177 : libata 01f0-01f7 : 0000:00:1f.1 01f0-01f7 : libata 0376-0376 : 0000:00:1f.1 0376-0376 : libata 03c0-03df : vga+ 03f6-03f6 : 0000:00:1f.1 03f6-03f6 : libata 0400-047f : 0000:00:1f.0 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0410-0415 : ACPI CPU throttle 0420-0420 : ACPI PM2_CNT_BLK 0428-042f : ACPI GPE0_BLK 0460-047f : iTCO_wdt 0500-053f : 0000:00:1f.0 0cf8-0cff : PCI conf1 1000-1fff : PCI Bus #02 1000-10ff : 0000:02:00.0 1000-10ff : sky2 1640-164f : motherboard 2000-2fff : PCI Bus #01 2000-207f : 0000:01:00.0 3020-302f : 0000:00:1f.2 3020-302f : libata 3040-305f : 0000:00:1d.3 3040-305f : uhci_hcd 3060-307f : 0000:00:1d.2 3060-307f : uhci_hcd 3080-309f : 0000:00:1d.1 3080-309f : uhci_hcd 30a0-30bf : 0000:00:1d.0 30a0-30bf : uhci_hcd 30c0-30cf : 0000:00:1f.1 30c0-30cf : libata 30d0-30d7 : 0000:00:1f.2 30d0-30d7 : libata 30d8-30df : 0000:00:1f.2 30d8-30df : libata 30f0-30f3 : 0000:00:1f.2 30f0-30f3 : libata 30f4-30f7 : 0000:00:1f.2 30f4-30f7 : libata efa0-efbf : 0000:00:1f.3 ----- /proc/ioports end ----- ----- /proc/interrupts ----- 0: 1403177 0 IO-APIC-edge timer 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-fasteoi acpi 14: 61243 0 IO-APIC-edge libata 15: 0 0 IO-APIC-edge libata 16: 889610 0 IO-APIC-fasteoi uhci_hcd:usb4, eth0, nvidia 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3 19: 77544 0 IO-APIC-fasteoi uhci_hcd:usb2, ohci1394, libata 22: 658 0 IO-APIC-fasteoi HDA Intel 23: 22665 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5 NMI: 0 0 LOC: 1402903 1402887 ERR: 0 ----- /proc/interrupts end ----- ----- /proc/dma ----- 4: cascade ----- /proc/dma end ----- >> misc.3: FPU >> misc.3.1: DMA >> misc.3.2: PIC >> misc.3.3: timer >> misc.3.4: RTC >> cpu.1: cpuinfo ----- /proc/cpuinfo ----- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping : 6 cpu MHz : 1000.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4328.76 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping : 6 cpu MHz : 2167.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm bogomips : 4322.62 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ----- /proc/cpuinfo end ----- >> memory.1: main memory size kcore mem: 0x7f103000 klog mem 0: 0x0 klog mem 1: 0x0 klog mem: 0x0 bios mem: 0x0 meminfo: 0x7cdb6000 >> pci.1: sysfs drivers ----- sysfs driver list (id 0x5c5781df3fc2165f) ----- i2c_adapter: module = i2c_core sd: /devices/pci0000:00/0000:00:1f.2/host2/target2:0:1/2:0:1:0 sr: /devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0 sbp2: module = sbp2 nodemgr: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0/fw-host0 nodemgr: module = ieee1394 hci_usb: module = hci_usb hci_usb: /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1 hci_usb: /devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0 appleir: module = appleir appleir: /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0 xpad: module = xpad usbhid: module = usbhid usbhid: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1 usbhid: /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0 usbhid: /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0 hiddev: module = usbhid usb: /devices/pci0000:00/0000:00:1d.3/usb4/4-1 usb: /devices/pci0000:00/0000:00:1d.3/usb4/4-2 usb: /devices/pci0000:00/0000:00:1d.0/usb1/1-1 usb: /devices/pci0000:00/0000:00:1d.1/usb2/2-1 usb: /devices/pci0000:00/0000:00:1d.7/usb5/5-4 usb: /devices/pci0000:00/0000:00:1d.7/usb5 usb: /devices/pci0000:00/0000:00:1d.3/usb4 usb: /devices/pci0000:00/0000:00:1d.2/usb3 usb: /devices/pci0000:00/0000:00:1d.1/usb2 usb: /devices/pci0000:00/0000:00:1d.0/usb1 usb: module = usbcore hub: /devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0 hub: /devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0 hub: /devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0 hub: /devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0 hub: /devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0 hub: module = usbcore usbfs: module = usbcore system: /devices/pnp0/00:07 system: /devices/pnp0/00:05 system: /devices/pnp0/00:01 parport_pc: module = parport_pc HDA Intel: module = snd_hda_intel HDA Intel: /devices/pci0000:00/0000:00:1b.0 nvidia: module = nvidia nvidia: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 sky2: module = sky2 sky2: /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 shpchp: module = shpchp agpgart-intel: module = intel_agp agpgart-intel: /devices/pci0000:00/0000:00:00.0 PCI_IDE: module = generic ata_generic: module = ata_generic ata_piix: module = ata_piix ata_piix: /devices/pci0000:00/0000:00:1f.2 ata_piix: /devices/pci0000:00/0000:00:1f.1 ehci_hcd: module = ehci_hcd ehci_hcd: /devices/pci0000:00/0000:00:1d.7 ohci1394: module = ohci1394 ohci1394: /devices/pci0000:00/0000:00:1e.0/0000:04:03.0 uhci_hcd: module = uhci_hcd uhci_hcd: /devices/pci0000:00/0000:00:1d.3 uhci_hcd: /devices/pci0000:00/0000:00:1d.2 uhci_hcd: /devices/pci0000:00/0000:00:1d.1 uhci_hcd: /devices/pci0000:00/0000:00:1d.0 pcieport-driver: /devices/pci0000:00/0000:00:1c.1 pcieport-driver: /devices/pci0000:00/0000:00:1c.0 pcieport-driver: /devices/pci0000:00/0000:00:01.0 iTCO_wdt: /devices/platform/iTCO_wdt iTCO_wdt: module = iTCO_wdt serial8250: /devices/platform/serial8250 ----- sysfs driver list end ----- >> pci.2: get sysfs pci data pci device: name = 0000:00:00.0 path = /devices/pci0000:00/0000:00:00.0 modalias = "pci:v00008086d000027A0sv00008086sd00007270bc06sc00i00" class = 0x60000 vendor = 0x8086 device = 0x27a0 subvendor = 0x8086 subdevice = 0x7270 irq = 0 config[64] pci device: name = 0000:00:01.0 path = /devices/pci0000:00/0000:00:01.0 modalias = "pci:v00008086d000027A1sv00000000sd00000000bc06sc04i00" class = 0x60400 vendor = 0x8086 device = 0x27a1 subvendor = 0x0 subdevice = 0x0 irq = 16 config[64] pci device: name = 0000:00:07.0 path = /devices/pci0000:00/0000:00:07.0 modalias = "pci:v00008086d000027A3sv00000000sd00000000bc11sc01i00" class = 0x110100 vendor = 0x8086 device = 0x27a3 subvendor = 0x0 subdevice = 0x0 irq = 11 res[0] = 0x8a404000 0x8a404fff 0x200 config[64] pci device: name = 0000:00:1b.0 path = /devices/pci0000:00/0000:00:1b.0 modalias = "pci:v00008086d000027D8sv000010ECsd00000885bc04sc03i00" class = 0x40300 vendor = 0x8086 device = 0x27d8 subvendor = 0x10ec subdevice = 0x885 irq = 22 res[0] = 0x8a400000 0x8a403fff 0x204 config[64] pci device: name = 0000:00:1c.0 path = /devices/pci0000:00/0000:00:1c.0 modalias = "pci:v00008086d000027D0sv00000000sd00000000bc06sc04i00" class = 0x60400 vendor = 0x8086 device = 0x27d0 subvendor = 0x0 subdevice = 0x0 irq = 17 config[64] pci device: name = 0000:00:1c.1 path = /devices/pci0000:00/0000:00:1c.1 modalias = "pci:v00008086d000027D2sv00000000sd00000000bc06sc04i00" class = 0x60400 vendor = 0x8086 device = 0x27d2 subvendor = 0x0 subdevice = 0x0 irq = 16 config[64] pci device: name = 0000:00:1d.0 path = /devices/pci0000:00/0000:00:1d.0 modalias = "pci:v00008086d000027C8sv00008086sd00007270bc0Csc03i00" class = 0xc0300 vendor = 0x8086 device = 0x27c8 subvendor = 0x8086 subdevice = 0x7270 irq = 23 res[4] = 0x30a0 0x30bf 0x101 config[64] pci device: name = 0000:00:1d.1 path = /devices/pci0000:00/0000:00:1d.1 modalias = "pci:v00008086d000027C9sv00008086sd00007270bc0Csc03i00" class = 0xc0300 vendor = 0x8086 device = 0x27c9 subvendor = 0x8086 subdevice = 0x7270 irq = 19 res[4] = 0x3080 0x309f 0x101 config[64] pci device: name = 0000:00:1d.2 path = /devices/pci0000:00/0000:00:1d.2 modalias = "pci:v00008086d000027CAsv00008086sd00007270bc0Csc03i00" class = 0xc0300 vendor = 0x8086 device = 0x27ca subvendor = 0x8086 subdevice = 0x7270 irq = 18 res[4] = 0x3060 0x307f 0x101 config[64] pci device: name = 0000:00:1d.3 path = /devices/pci0000:00/0000:00:1d.3 modalias = "pci:v00008086d000027CBsv00008086sd00007270bc0Csc03i00" class = 0xc0300 vendor = 0x8086 device = 0x27cb subvendor = 0x8086 subdevice = 0x7270 irq = 16 res[4] = 0x3040 0x305f 0x101 config[64] pci device: name = 0000:00:1d.7 path = /devices/pci0000:00/0000:00:1d.7 modalias = "pci:v00008086d000027CCsv00008086sd00007270bc0Csc03i20" class = 0xc0320 vendor = 0x8086 device = 0x27cc subvendor = 0x8086 subdevice = 0x7270 irq = 23 res[0] = 0x8a405400 0x8a4057ff 0x200 config[64] pci device: name = 0000:00:1e.0 path = /devices/pci0000:00/0000:00:1e.0 modalias = "pci:v00008086d00002448sv00000000sd00000000bc06sc04i01" class = 0x60401 vendor = 0x8086 device = 0x2448 subvendor = 0x0 subdevice = 0x0 irq = 0 config[64] pci device: name = 0000:00:1f.0 path = /devices/pci0000:00/0000:00:1f.0 modalias = "pci:v00008086d000027B9sv00008086sd00007270bc06sc01i00" class = 0x60100 vendor = 0x8086 device = 0x27b9 subvendor = 0x8086 subdevice = 0x7270 irq = 0 config[64] pci device: name = 0000:00:1f.1 path = /devices/pci0000:00/0000:00:1f.1 modalias = "pci:v00008086d000027DFsv00008086sd00007270bc01sc01i8a" class = 0x1018a vendor = 0x8086 device = 0x27df subvendor = 0x8086 subdevice = 0x7270 irq = 18 res[0] = 0x1f0 0x1f7 0x110 res[1] = 0x3f6 0x3f6 0x110 res[2] = 0x170 0x177 0x110 res[3] = 0x376 0x376 0x110 res[4] = 0x30c0 0x30cf 0x101 config[64] pci device: name = 0000:00:1f.2 path = /devices/pci0000:00/0000:00:1f.2 modalias = "pci:v00008086d000027C4sv00008086sd00007270bc01sc01i8f" class = 0x1018f vendor = 0x8086 device = 0x27c4 subvendor = 0x8086 subdevice = 0x7270 irq = 19 res[0] = 0x30d8 0x30df 0x101 res[1] = 0x30f4 0x30f7 0x101 res[2] = 0x30d0 0x30d7 0x101 res[3] = 0x30f0 0x30f3 0x101 res[4] = 0x3020 0x302f 0x101 res[5] = 0x8a405000 0x8a4053ff 0x200 config[64] pci device: name = 0000:00:1f.3 path = /devices/pci0000:00/0000:00:1f.3 modalias = "pci:v00008086d000027DAsv00008086sd00007270bc0Csc05i00" class = 0xc0500 vendor = 0x8086 device = 0x27da subvendor = 0x8086 subdevice = 0x7270 irq = 11 res[4] = 0xefa0 0xefbf 0x101 config[64] pci device: name = 0000:01:00.0 path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0 modalias = "pci:v000010DEd00000395sv00000000sd00000402bc03sc00i00" class = 0x30000 vendor = 0x10de device = 0x395 subvendor = 0x0 subdevice = 0x402 irq = 16 res[0] = 0x89000000 0x89ffffff 0x200 res[1] = 0x80000000 0x87ffffff 0x120c res[3] = 0x88000000 0x88ffffff 0x204 res[5] = 0x2000 0x207f 0x101 config[64] pci device: name = 0000:02:00.0 path = /devices/pci0000:00/0000:00:1c.0/0000:02:00.0 modalias = "pci:v000011ABd00004362sv000011ABsd00005321bc02sc00i00" class = 0x20000 vendor = 0x11ab device = 0x4362 subvendor = 0x11ab subdevice = 0x5321 irq = 16 res[0] = 0x8a300000 0x8a303fff 0x204 res[2] = 0x1000 0x10ff 0x101 res[6] = 0x8a500000 0x8a51ffff 0x7200 config[64] pci device: name = 0000:03:00.0 path = /devices/pci0000:00/0000:00:1c.1/0000:03:00.0 modalias = "pci:v000014E4d00004328sv0000106Bsd00000087bc02sc80i00" class = 0x28000 vendor = 0x14e4 device = 0x4328 subvendor = 0x106b subdevice = 0x87 irq = 10 res[0] = 0x8a200000 0x8a203fff 0x204 res[2] = 0x8a000000 0x8a0fffff 0x120c config[64] pci device: name = 0000:04:03.0 path = /devices/pci0000:00/0000:00:1e.0/0000:04:03.0 modalias = "pci:v0000104Cd00008025sv00000000sd00000000bc0Csc00i10" class = 0xc0010 vendor = 0x104c device = 0x8025 subvendor = 0x0 subdevice = 0x0 irq = 19 res[0] = 0x8a104000 0x8a1047ff 0x200 res[1] = 0x8a100000 0x8a103fff 0x200 config[64] ---------- PCI raw data ---------- bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 8086:27a0:8086:7270:03 class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 a0 27 06 00 90 20 03 00 00 06 00 00 00 00 "...'... ........" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 72 "..............pr" 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 "................" bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 8086:27a1:0000:0000:03 class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 16 00: 86 80 a1 27 07 00 10 00 03 00 04 06 40 00 01 00 "...'........@..." 10: 00 00 00 00 00 00 00 00 00 01 01 00 20 20 00 00 "............ .." 20: 00 88 f0 89 01 80 f1 87 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 88 00 00 00 00 00 00 00 0b 01 08 00 "................" bus 00, slot 07, func 0, vend:dev:s_vend:s_dev:rev 8086:27a3:0000:0000:03 class 11, sub_class 01 prog_if 00, hdr 0, flags <>, irq 11 addr0 8a404000, size 00001000 00: 86 80 a3 27 02 00 b0 00 03 00 01 11 00 00 00 00 "...'............" 10: 00 40 40 8a 00 00 00 00 00 00 00 00 00 00 00 00 ".@@............." 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 00 00 "................" bus 00, slot 1b, func 0, vend:dev:s_vend:s_dev:rev 8086:27d8:10ec:0885:02 class 04, sub_class 03 prog_if 00, hdr 0, flags <>, irq 22 addr0 8a400000, size 00004000 00: 86 80 d8 27 06 00 10 00 02 00 03 04 40 00 00 00 "...'........@..." 10: 04 00 40 8a 00 00 00 00 00 00 00 00 00 00 00 00 "..@............." 20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 85 08 "................" 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 "....P..........." bus 00->02, slot 1c, func 0, vend:dev:s_vend:s_dev:rev 8086:27d0:0000:0000:02 class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 17 00: 86 80 d0 27 07 00 10 00 02 00 04 06 40 00 81 00 "...'........@..." 10: 00 00 00 00 00 00 00 00 00 02 02 00 10 10 00 00 "................" 20: 30 8a 30 8a 51 8a 51 8a 00 00 00 00 00 00 00 00 "0.0.Q.Q........." 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 01 00 00 "....@..........." bus 00->03, slot 1c, func 1, vend:dev:s_vend:s_dev:rev 8086:27d2:0000:0000:02 class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 16 00: 86 80 d2 27 07 00 10 00 02 00 04 06 40 00 81 00 "...'........@..." 10: 00 00 00 00 00 00 00 00 00 03 03 00 f0 00 00 20 "............... " 20: 20 8a 20 8a 01 8a 01 8a 00 00 00 00 00 00 00 00 " . ............." 30: 00 00 00 00 40 00 00 00 00 00 00 00 0b 02 00 00 "....@..........." bus 00, slot 1d, func 0, vend:dev:s_vend:s_dev:rev 8086:27c8:8086:7270:02 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 23 addr4 000030a0, size 00000020 00: 86 80 c8 27 05 00 80 02 02 00 03 0c 00 00 80 00 "...'............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: a1 30 00 00 00 00 00 00 00 00 00 00 86 80 70 72 ".0............pr" 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 "................" bus 00, slot 1d, func 1, vend:dev:s_vend:s_dev:rev 8086:27c9:8086:7270:02 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 19 addr4 00003080, size 00000020 00: 86 80 c9 27 05 00 80 02 02 00 03 0c 00 00 00 00 "...'............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 81 30 00 00 00 00 00 00 00 00 00 00 86 80 70 72 ".0............pr" 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 02 00 00 "................" bus 00, slot 1d, func 2, vend:dev:s_vend:s_dev:rev 8086:27ca:8086:7270:02 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 18 addr4 00003060, size 00000020 00: 86 80 ca 27 05 00 80 02 02 00 03 0c 00 00 00 00 "...'............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 61 30 00 00 00 00 00 00 00 00 00 00 86 80 70 72 "a0............pr" 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 00 "................" bus 00, slot 1d, func 3, vend:dev:s_vend:s_dev:rev 8086:27cb:8086:7270:02 class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 16 addr4 00003040, size 00000020 00: 86 80 cb 27 05 00 80 02 02 00 03 0c 00 00 00 00 "...'............" 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "................" 20: 41 30 00 00 00 00 00 00 00 00 00 00 86 80 70 72 "A0............pr" 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 04 00 00 "................" bus 00, slot 1d, func 7, vend:dev:s_vend:s_dev:rev 8086:27cc:8086:7270:02 class 0c, sub_class 03 prog_if 20, hdr 0, flags <>, irq 23 addr0 8a405400, size 00000400 00: 86 80 cc 27 06 00 90 02 02 20 03 0c 00 00 00 00 "...'..... ......" 10: 00 54 40 8a 00 00 00 00 00 00 00 00 00 00 00 00 ".T@............." 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 70 72 "..............pr" 30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 00 00 "....P..........." bus 00->04, slot 1e, func 0, vend:dev:s_vend:s_dev:rev 8086:2448:0000:0000:e2 class 06, sub_class 04 prog_if 01, hdr 1, flags <>, irq 0 00: 86 80 48 24 07 00 10 00 e2 01 04 06 00 00 01 00 "..H$............" 10: 00 00 00 00 00 00 00 00 00 04 04 20 f0 00 80 22 "........... ..."" 20: 10 8a 10 8a f1 ff 01 00 00 00 00 00 00 00 00 00 "................" 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 "....P..........." bus 00, slot 1f, func 0, vend:dev:s_vend:s_dev:rev 8086:27b9:8086:7270:02 class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0 00: 86 80 b9 27 07 00 10 02 02 00 01 06 00 00 80 00 "...'............" 10: 00 00 00 00 00 00 00 00 00 00 00