# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"stylus"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"eraser"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Driver		"wacom"
	Identifier	"cursor"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc R423 UK [Radeon X800SE (PCIE)]"
	Driver		"nvidia"
	Busid		"PCI:4:3:0"
        Option      "ModeValidation" "NoMaxPClkCheck, AllowNon60HzDFPModes, NoVesaModes, NoXServerModes, NoPredefinedModes"
	Option		"AddARGBVisuals"	"True"
	Option		"AddARGBGLXVisuals"	"True"
	Option		"RandRRotation"		"true"
#	Option		"NoLogo"	"True"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
#	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc R423 UK [Radeon X800SE (PCIE)]"
	Monitor		"Generic Monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth		24
		Modes		"1920x1080_60"

# Note: when starting up "invoke-rc.d gdm start", you must have the VGA directly
#       connected to the Samsung LN40A630M1FXZA, and once it's started up in mode
#       1920x1080@60Hz, then you can use an IOgear Video Splitter to also connect 
#       the Dell 2405FPW monitor (via VGA) as well as the Samsung LN40A630M1FXZA.
#       You'll see a bit of black bars along the top and bottom of the Dell monitor's
#       display, that's because the panel is actually 1920x1200, whereas the TV is
#       1920x1080. It's pretty awkward, because when rebooting you'll have to re-do
#       all this plugging and unplugging before restarting gdm.

	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
  screen "Default Screen"
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	
	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
EndSection
Section "Module"
	Load		"glx"
EndSection